The A3 Tactical Spinners are a customer favorite. These 360 degree target systems may at first seem like nothing special until you shoot at them and gravity takes over. A single shot will not spin the target over, it takes well-timed successive shots to spin the target a full rotation. After the first shot, every shot after is a moving target and unless you time your shot appropriately on the back swing, the target will lose momentum. Ideally you can spin a 2-target spinner one full rotation with 3 well-timed shots. Once the target is spinning, hitting the target on the backswing becomes increasingly more difficult as the rotation speeds up.

As with most A3 Tactical target systems, we have designed them to be modular so you can upgrade, add to, change it up, or expand whenever you want to. You can start with a SPR001 single spinner target stand (or an SW001 single swinger target stand) and upgrade to two spinners at any time by simply ordering the SP003 two-spinner upgrade kit. You can also substitute or add Swinger targets (further down the page) on the same stand or bridge two stands together with our easy to use threaded stand connectors (RH004).

A3 Tactical Spinner Stands are manufactured from heavy duty 1-1/2" and 1-3/4" square tubing and heavy wall sleeved connectors. The center spinner arm is protected by 1/4" angle iron and all spinners rotate on a bronze-bushed and greasable pivot, good for years of trouble-free service. As with all A3 target systems the targets are replaceable and interchangeable with any of our "Bolted" targets. Powdercoated in durable A3 Olive Drab powdercoat.

NOTE: This is the stand and hanging chains only. We sell targets in various shapes, sizes and materials and the target itself must be purchased separately. To purchase compatible steel and AR500 targets, follow this LINK to our "Bolted Targets" page.

Swingers are similar to the Spinners but only have one suspended target. Without the counterweight of the other target, it is much more difficult (especially with the larger, heavier targets) to make the target spin full rotation. As with most A3 Tactical target systems, we have designed them to be modular so you can upgrade, add to, change it up, or expand whenever you want to. You can start with a SW001 single swinger target stand (or an SPR001 single spinner target stand) and upgrade to two swingers at any time by simply ordering the SW003 two-swinger upgrade kit. You can also substitute or add Spinner targets (above) on the same stand or bridge two stands together with our easy to use threaded stand connectors (RH004).

A3 Tactical stands are made from heavy duty 1-1/2" and 1-3/4" square tubing with 1/4" chain plates. As with all A3 target systems the targets are replaceable and interchangeable with any of our "Bolted" targets. The center spinner arm on the top/bottom 2-target system is protected by 1/4" angle iron and all spinners rotate on a bronze-bushed and greasable pivot, good for years of trouble-free service. Powdercoated in durable A3 Olive Drab powdercoat.

NOTE: This is the reactive target stand only. We sell targets in various shapes, sizes and materials and targets must be purchased separately. To purchase compatible steel and AR500 targets, follow this LINK to our "Bolted Targets" page.

The A3 Tactical Spinners are a customer favorite. These 360 degree target systems may at first seem like nothing special until you shoot at them and gravity takes over. A single shot will not spin the target over, it takes well-timed successive shots to spin the target a full rotation. After the first shot, every shot after is a moving target and unless you time your shot appropriately on the back swing, the target will lose momentum. Ideally you can spin a 2-target setup one full rotation with 3 well-timed shots (depending on coliber and target size). Once the target is spinning, hitting the target on the backswing becomes increasingly more difficult as the rotation speeds up.

A3 Tactical stands are made from heavy duty 1-1/2" and 1-3/4" square tubing with 1/4" chain plates. As with all A3 target systems, the targets are replaceable and interchangeable with any of our "Bolted" targets. The center spinner arm on the top/bottom 2-target system is protected by 1/4" angle iron and all spinners rotate on a bronze-bushed and greasable pivot, good for years of trouble-free service. Powdercoated in durable A3 Olive Drab powdercoat.

NOTE: This is the reactive target stand only. We sell targets in various shapes, sizes and materials and targets must be purchased separately. To purchase compatible steel and AR500 targets, follow this LINK to our "Bolted Targets" page.

A3 Tactical's Quad-Paddle Target system places 4 targets of your choice on a rotating horizontal axis. The first hit puts all four targets into motion. With each successive hit the paddle speed increases, elevating the degree of difficulty.
A3 Tactical stands are made from heavy duty 2" and 1-3/4" square tubing with 1/4" mounting plates. As with all A3 target systems the targets are replaceable and interchangeable with any of our "Bolted" targets. The heavy-duty center spinner hub rotates on oil-impregnated bronze bushings and is good for years of trouble-free service. Powdercoated in durable A3 Olive Drab powdercoat.

NOTE: This is the reactive target stand only. We sell targets in various shapes, sizes and materials and targets must be purchased separately. To purchase compatible steel and AR500 targets, follow this LINK to our "Bolted Targets" page.